Rancang Bangun Prototipe Alat Ukur Kecepatan dan Arah Angin Berbasis  Arduino Pro Mini Studi Kasus Penerapan pada Olahraga Paralayang di  Parangtritis

Tony Yulianto; Arief Ikhwan Wicaksono; Netania Indi Kusumaningtyas

doi:10.30989/teknomatika.v13i1.1093

Tony Yulianto Universitas Jenderal Achmad Yani Yogyakarta
Arief Ikhwan Wicaksono Universitas Jenderal Achmad Yani Yogyakarta
Netania Indi Kusumaningtyas Universitas Jenderal Achmad Yani Yogyakarta

DOI: https://doi.org/10.30989/teknomatika.v13i1.1093

Abstract

Wind is a phenomenon observable a mass movement of air the effect and experienced in everyday life due to differences in the air pressure in two separate places so there the airflow from a having the air pressure is higher to a lower have pressure air. Fast slowness wind speed depends on how big a pressure difference of the two it. Essentially any need sports facilities must meet the standard sports itself. Sports paralayang, on the need facilities able to meet a need the related sports development. This study aims to to build a helmet safety to users paralayang on sports paralayang in parangritis. A helmet these were designed based microcontroller to help users paralayang, so users of paralayang would quickly get information that can be used as an effort to safety. The helmet worn by paralayang, which in upon the helmet these there were instrument that serves to measuring wind speed. When the wind is fast , this instrument will sound and paralayang must be down. So risk can minimize accident. The result of this study graphic display the output of a system for conducting the process of wind measurements is expected to measuring changes wind is more precision by means of sensors optocoupler which are cheap and have good qualities.

References

[1] S. L. Lorensia and S. Sudarti, “ANALISIS MEKANISME KERJA ANGIN PADA OLAHRAGA PARALAYANG,” CERMIN: Jurnal Penelitian, vol. 6, no. 2, pp. 373–386, 2022.

[2] S. Bagas Priyambodo, “The Design of Speed and Direction (Velocity) Measuring Instruments Based On Arduino Uno Microcontroller,” Jurnal Ilmu Fisika dan Terapannya, vol. 7, no. 2, pp. 103–116, 2018.

[3] Y. A. K. Utama, “Perbandingan Kualitas Antar Sensor Suhu dengan Menggunakan Arduino Pro Mini,” e-NARODROID: Jurnal Berkala Program Studi Sistem Komputer, vol. 2, no. 2, pp. 145–150, 2016.

[4] M. K. A. M. Rasli, N. K. Madzhi, and J. Johari, “Smart helmet with sensors for accident prevention,” in 2013 International conference on electrical, electronics and system engineering (ICEESE), IEEE, 2013, pp. 21–26.

[5] D. Wijayanti, “Rancang bangun alat ukur kecepatan dan arah angin berbasis arduino uno atmega 328P,” Inovasi Fisika Indonesia, vol. 4, no. 3, 2015.

[6] O. Derek, E. K. Allo, and N. M. Tulung, “Rancang bangun alat monitoring kecepatan angin dengan koneksi wireless menggunakan arduino uno,” Jurnal Teknik Elektro dan Komputer, vol. 5, no. 4, pp. 1–7, 2016.

[7] R. Susanto Anna Dara Andriana, “Perbandingan model waterfall dan prototyping untuk pengembangan sistem informasi,” Majalah Ilmiah UNIKOM, 2016.

[8] H. Andri, “Rancang Bangun System Battery Charging Automatic,” Universitas Indonesia, 2010.

[9] J. Arifin, L. N. Zulita, and H. Hermawansyah, “Perancangan murottal otomatis menggunakan mikrokontroller arduino mega 2560,” Jurnal Media Infotama, vol. 12, no. 1, 2016.

[10] R. Darmawan, “Pengalaman, usability, dan antarmuka grafis: sebuah penelusuran teoritis,” Journal of Visual Art and Design, vol. 4, no. 2, pp. 95–102, 2013.